您要查找的是不是：
- Keywords silica gel;phosphotungstic acid;catalysis;amyl butyrate; 关键词硅胶;磷钨酸;催化;丁酸戊酯;
- Keywords silica gel membrane;bone regeneration;osteogenesis; 关键词硅胶膜;骨再生;骨生成;
- Keywords Silica gel;Ethylsilicate;SAPO_5 molecular sieve;Crystallization;Template;Acidity;Catalytic performance; 硅凝胶;硅酸乙酯;SAPO-5分子筛;晶化;模板剂;酸性;催化性能;
- Keywords Silica gel;Ethylsilicate;Crystallization;SAPO_5 molecular sieve;Synthesis;Structure;Property; 硅凝胶;硅酸乙酯;晶化;SAPO-5分子筛;合成;结构;性质;
- Keywords silica gel prosthesis;augmentation mammoplasty;security;disputing issue;complication; 硅凝胶假体;隆乳;安全性;争议问题;并发症;
- Keywords Silica gel;Adsorption;Benzoic acid;Benzene;Cyclohexane solution;SDM-A;Adsorption thermodynamics; 硅胶;吸附;苯甲酸;苯;环己烷溶液;SDM-A;吸附热力学;
- Keywords silica gel;CPTCS-silica;poly（allylamine）-silica composite;adsorption; 硅胶;氯丙基三氯硅烷硅胶;聚烯丙基胺硅胶复合材料;吸附;
- The crude oil is chromatographed over silica gel. 粗制油状物用硅胶进行色谱分离。
- Keywords silica gel purifying filter paper;active carbon purifying filter paper;depigment defat;pesticide residue test;active carbon silica gel purifying filter paper; 硅胶净化滤纸;活性炭净化滤纸;脱色素;脱脂肪;农药残留检验;活性炭、硅胶净化滤纸;
- The purity of isoquercitrin was isolated with a silica gel column. 酶反应产物用硅胶柱层析法提取,可以得到高纯度的异槲皮甙。
- The handpiece cable is made from silica gel tube,soft and durable. 换能器尾线采用进口材料硅胶管，柔软耐用。
- All seals of this machine use the thermostable silica gel (food grade). 该机所有密封件均采用耐高温硅胶件（食品级）。
- There is no possibility to form silica gel in the hard-ened waterglass. 硬化的水玻璃实际上是失水的高模数水玻璃，不可能有硅凝胶生成。
- The specimen was extracted by the macroreticular resin and silica gel column. 样品经大孔树脂柱、硅胶柱分离，然后用TLC进行鉴定合并。
- You may reactivate the silica gel by desorbing the water through heating. 硅胶吸附水份后可通过脱附方式除掉水份而再生。
- The alternative use of buffered silica gel resulted in modest hydrolysis (~5-10%) of the imine. 选用温和的水解导致缓冲硅胶(~5-10%25)的亚胺.
- METHODS: Alcoholic extraction, silica gel, ODS column chromatography and recrystallization were used. 方法:采用工业酒精提取、胶柱层析、DS柱层析和重结晶等方法。
- Most of the commercially available reversed phase packing materials utilize fully end-capped, high-purity silica gel. 大部分市面上之逆相充填材料利用完善之终结处理,高纯度之矽胶。
- The pastern mold adopts wearable and heat-resistant silica gel, The aluminium mold can come to 200. 胶模采用耐磨热硅胶;外铝模温度可达200。
- Sand should be added carefully, otherwise the silica gel layer will be destructed. 装石英砂时应慢慢加入,不可一次加入而造成柱层破坏。
